| Zur Titelseite | |
| outborad | |
| Netto Preisliste per 15.04.2008 | |
| Bezeichnung | NETTO CHF |
| LV4 --Four Channel Low-Voltage controller , | 2'250.00 |
| RC4 --Four Channel remote handset with E-Stop, (excluding cable) , | 450.00 |
| RC4 cable only, 10 metres , | 300.00 |
| LV6 --Six Channel Low-Voltage controller , | 2'900.00 |
| RC6 --Six Channel remote handset with E-Stop, (excluding cable) , | 600.00 |
| RC6 cable only, 10 metres , | 430.00 |
| LV8 --Eight Channel Low Voltage controller , | 3'400.00 |
| RC8 – Eight Channel remote handset with E-Stop, (excluding cable) , | 680.00 |
| RC8 cable only, 10 metres , | 430.00 |
| RC16 – Sixteen Channel remote handset with E-Stop, (excluding cable) , | 1'000.00 |
| RC12/RC16 cable only, 10metres , | 700.00 |
| RC16/12 Splitter Cable, 1m, to connect RC16 to two LV8’s , | 480.00 |
| LV12 --Twelve Channel Low Voltage controller , | 4'500.00 |
| RC12 --Twelve Channel remote handset with E-Stop, (excluding cable) , | 900.00 |
| RC12/RC16 cable only, 10metres , | 700.00 |
| DV4 --Four Channel Direct Control controller , | 3'050.00 |
| RC4 --Four Channel remote handset with E-Stop, (excluding cable) , | 450.00 |
| RC4 cable only, 10 metres , | 300.00 |
| DV8 --Eight Channel Direct Control controller , | 4'150.00 |
| RC8 – Eight Channel remote handset with E-Stop, (excluding cable) , | 680.00 |
| RC8 cable only, 10 metres , | 430.00 |
| Remote Go handheld switch (uses standard 3-pin XLR cable, not included) , | 250.00 |
| Remote E-Stop switch box (uses standard 3-pin XLR cable, not included) , | 250.00 |
| Remote Go or E-Stop Link Lead XLR-3, 0.5metre , | 40.00 |
| LS3 Splitter Box, (for LV6 / LV12) Male Socapex to 3 C-Form Red/Yellow pairs, with truss mount clamp , | 610.00 |
| LS4 Splitter Box, (for LV8) Male / Female Socapex pair to 4 C-Form Red/Yellow pairs, with truss mount clamp , | 880.00 |
| DS4 Splitter Box, (for DV8) Male Socapex to 4 C-Form Red, with truss mount clamp , | 510.00 |
| Socapex Multicore Cable for Splitter Box, 20metres (+/-£10.00 per metre ) , | 530.00 |
| CM Lodestar Accessories (to install into CM Lodestar hoist): , | |
| SMART LIMIT Module (converts from Low-Voltage control to Direct control whilst maintaining limit switch operation) , | 200.00 |
| SMART SAFE Module (automatically detects and reverses incorrect inlet phase) , | 200.00 |
| Optical Encoder, Single-Phase XLR4 or Bi-Phase XLR6 versions available for both one-tonne or half-tonne hoists , | 200.00 |
| Zur Titelseite |
